Basic Scuba Equipment Maintenance Tips

Keeping your scuba diving equipment in top shape is necessary to ensure a safe and fulfilling diving experience. Take note that quality counts a lot in the purchase of scuba equipment and it would be worthwhile to determine how often you intend to use the gear. Consequently, proper equipment cleaning and storage after each dive will help extend its serviceable life and make the most out of your investment. Find below a few scuba equipment maintenance tips.

Diving Masks

Store your diving mask in a durable casing to avoid breakage. Likewise, there are defogging agents available that will help sustain a good vision from your lenses while underwater. Following a dive, rinse the diving mask with water and store it away from direct sunlight to avoid any instance of discoloring.

Booties

Use a soft brush to clear debris from your booties. To avoid the encounter of sticky zippers, just apply lubricant on the zippers and they are ready to go. Always store them in a cool and dry place.

Buoyancy Compensator Device

It is a must to clean your buoyancy compensator device (BCD)--inside and out--after every dive. Use a soft brush and cleaning agent to do this. Dive shops retail patch kits to aid in the repair of buoyancy compensator devices. Replacements for zippers, velcro, buckles, valves and power inflators are also available. When storing, hang the BC in a dry place to avoid growth of mildew.

Scuba Diving Gadgets

Scuba gear such as dive computers and gauges are specifically designed to withstand diverse water conditions. Extend the useful life of these devices through regular check-ups--from O-Ring inspections to battery replacements.

For a diving experience that entails lesser worries on your mind, an Aeris XR-2 Wrist Dive Computer efficiently performs the job of alerting you on particular safety limits, including decompression stops and gas levels in your cylinder tank.

Diving WetsuitsAfter each and every dive, rinse your wetsuit thoroughly with freshwater and a desalter to remove the brine. To prevent the build up of molds on the surface, wash the wetsuit immediately upon reaching home and consequently hang it to dry under the heat of the sun. Store the wetsuit in an upright position with a hanger and remember to keep it away from the sunlight when not in use. If you find a torn section on the wetsuit, there are dive shops that will do the repair work for you at a reasonable price.

If you're looking for a durable scuba diving wetsuit, there is the Aeris Rio 3/2 jumpsuit which is applicable for donning in both warm and cold temperatures. You can be assured that its neoprene material will withstand your numerous scuba diving escapades.